Introducing The Electrical Fire Terminator..."The
Split Electrical Wire Tube"
Electrical
Fire Prevention
Examples
Reduce the cost
and lead-time
Improve the
structure by minimizing the number of thube
Whrry-free
Total isolation
Additional
internal protective layers resist vibration and impact, which
would cause cracking.
Positive and
negative wires can be separated, preventing switchs from failure.
Wires inside will
never get tied, keeping it safe from potential electrical fire.
Protrusion and
cave shape design:
a. Easier marking and connecting for construction
b. Compatible with concrete, away from leaking of water and
electricity.
Keep mice away
from biting inside the ceiling.
¡@
Heve you ever thought about the danger
of using conventional wire tubes?
¡@
The structure of the pull wire consists of a six steel strand
and one reinforced carbon steel threaded line with fiberglass
capped coating, Providing the pull wire from excessive pulling/
pushing force and tearing resistance.
With the strand of reinforced carbon
steel, the pull wire
features optimal
elasticity, making it easily extended , along
with the piping channel without deformation.
There is a larger and a smaller pull head on both ends of the
wires. The larger head removes impurities inside the pipe, such as
oil stain, slurry and hair, whereas the smaller pull head goes
through smaller holes, such as 1/4 holes in split pipelines.
The pull wire comes available in 4.5mm and 7.0mm-the 4.5mm
type is designed for plastic of 0.4, 0.6, and 1 in. and steel
pipes at maximum pulling strength of 200 kg; the 7.0mm type is
designed for large size of plastic and steel pipes at pulling
strength of 400 kg.
